web stats
Home / Science / R&D Effort Produces Magnetic Devices to Enable More Powerful X-ray Lasers

R&D Effort Produces Magnetic Devices to Enable More Powerful X-ray Lasers

This Berkeley Lab-developed device, a niobium tin superconducting undulator prototype, set a record in magnetic field strength for a device of its kind. This type of undulator could be used to wiggle electron beams to emit light for a next generation of X-ray lasers. (Credit: Marilyn Chung/Berkeley Lab)

Click for a full size image


R&D Effort Produces Magnetic Devices to Enable More Powerful X-ray Lasers

Berkeley Lab demonstrates a record-setting magnetic field for a prototype superconducting undulator

By Glenn Roberts Jr.

Researchers at the Department of Energy’s Lawrence Berkeley National Laboratory (Berkeley Lab) and Argonne National Laboratory have collaborated to design, build, and test two devices, called superconducting undulators, which could make X-ray free-electron lasers (FELs) more powerful, versatile, compact, and durable.

X-ray FELs are powerful tools for studying the microscopic structure and other properties of samples, such as proteins that are key to drug design, exotic materials relevant to electronics and energy applications, and chemistry that is central to industrial processes like fuel production.

The recent development effort was motivated by SLAC National Accelerator Laboratory’s upgrade of its Linac Coherent Light Source (LCLS), the nation’s only X-ray FEL. This upgrade, now underway, is known as LCLS-II. All existing X-ray FELS, including both LCLS and LCLS-II, use permanent magnet undulators to generate intense pulses of X-rays. These devices produce X-ray light by passing high-energy bunches of electrons through alternating magnetic fields produced by a series of permanent magnets.

Superconducting undulators (SCUs) offer another technical solution and are considered among the most promising technologies to improve the performance of the next generation FELs, and of other types of light sources, such as Berkeley Lab’s Advanced Light Source (ALS) and Argonne’s Advanced Photon Source (APS).

SCUs replace the permanent magnets in the undulator with superconducting coils. The prototype SCUs have successfully produced stronger magnetic fields than conventional undulators of the same size. Higher fields, in turn, can produce higher-energy free-electron laser light to open up a broader range of experiments.

The superconducting undulator R&D project at Berkeley Lab was a team effort. Among the contributors: (from left) Heng Pan, Jordan Taylor, Soren Prestemon, Ross Schlueter, Diego Arbelaez, Jim Swanson, Ahmet Pekedis, Scott Myers, Tom Lipton, and Xiaorong Wang. (Credit: Marilyn Chung/Berkeley Lab)

Click for a full size image


Berkeley Lab’s 1.5-meter-long prototype undulator, which uses a superconducting material known as niobium-tin (Nb3Sn), set a record in magnetic field strength for a device of its design during testing at the Lab in September 2016.

“This is a much-anticipated innovation,” agreed Wim Leemans, Director, Accelerator Technology and Applied Physics (ATAP) . “Higher performance in a smaller footprint is something that benefits everyone — the laboratories that host the facilities, the funding agencies, and above all, the user community.”

Argonne’s test of another superconducting material, niobium-titanium, successfully reached its performance goal, and additionally passed a bevy of quality tests. Niobium-titanium has a lower maximum magnetic field strength than niobium-tin, but is further along in its development.

“The superconducting technology in general, and especially with the niobium tin, lived up to its promise of being the highest performer,” said Ross Schlueter, Head of the Magnetics Department in Berkeley Lab’s Engineering Division. “We’re very excited about this world record. This device allows you to get a much higher photon energy” from a given electron beam energy.

“We have expertise here both in free-electron laser undulators, as demonstrated in our role in leading the construction of LCLS-II’s undulators, and in synchrotron undulator development at the ALS,” noted Soren Prestemon, Director of the Berkeley Center for Magnet Technology (BCMT), which brings together the Accelerator Technology and Applied Physics Division (ATAP) and Engineering Division, to design and build a range of magnetic devices for scientific, medical, and other applications.

“The Engineering Division has a long history of forefront research on undulators, and this work continues that tradition,” states Henrik von der Lippe, Director, Engineering Division.

Diego Arbelaez, the lead engineer in the development of Berkeley Lab’s device, said earlier work at the Lab in building superconducting undulator prototypes for a different project were useful in informing the latest design, though there were still plenty of challenges.

Niobium-tin is a brittle material that cannot be drawn into a wire. For practical use, a pliable wire, which contains the components that will form niobium-tin when heat-treated, is used for winding the undulator coils. The full undulator coil is then heat-treated in a furnace at 1,200 degrees Fahrenheit.

The niobium-tin wire is wound around a steel frame to form tightly wrapped coils in an alternating arrangement. The precision of the winding is critical for the performance of the device. Arbelaez said, “One of the questions was whether you can maintain precision in its winding even though you are going through these large temperature variations.”

After the heat treatment, the coils are placed in a mold and impregnated with epoxy to hold the superconducting coils in place. To achieve a superconducting state and demonstrate its record-setting performance, the device was immersed in a bath of liquid helium to cool it down to about minus 450 degrees Fahrenheit.

Another challenge was in developing a fast shutoff to prevent catastrophic failure during an event known as “quenching.” During a quench, there is a sudden loss of superconductivity that can be caused by a small amount of heat generation. Uncontrolled quenching could lead to rapid heating that might damage the niobium-tin and surrounding copper and ruin the device.

This is a critical issue for the niobium-tin undulators due to the extraordinary current densities they can support. Berkeley Lab’s Marcos Turqueti led the effort to engineer a quench-protection system that can detect the occurrence of quenching within a couple thousandths of a second and shut down its effects within 10 thousandths of a second.

Arbelaez also helped devise a system to correct for magnetic-field errors while the undulator is in its superconducting state.

SLAC’s Paul Emma, the accelerator physics lead for LCLS-II, coordinated the superconducting undulator development effort.

Emma said that the niobium-tin superconducting undulator developed at Berkeley Lab shows potential but may require more extensive continuing R&D than Argonne’s niobium-titanium prototype. Argonne earlier developed superconducting undulators that are in use at its APS, and Berkeley Lab also hopes to add superconducting undulators at its ALS.

“With superconducting undulators,” Emma said, “you don’t necessarily lower the cost but you get better performance for the same stretch of undulator.”

A superconducting undulator of an equivalent length to a permanent magnetic undulator could produce light that is at least two to three times — perhaps up to 10 times — more powerful, and could also access a wider range in X-ray wavelengths, Emma said, producing a more efficient FEL.

Superconducting undulators also have no macroscopic moving parts, so they could conceivably be tuned more quickly with high precision. Superconductors also are far less prone to damage by high-intensity radiation than permanent-magnet materials, a significant issue in high-power accelerators such as those that will be installed for LCLS-II.

There appears to be a clear path forward to developing superconducting undulators for upgrades of existing and new X-ray free-electron lasers, Emma said, and for other types of light sources.

“Superconducting undulators will be the technology we go to eventually, whether it’s in the next 10 or 20 years,” he said. “They are powerful enough to produce the light we are going to need — I think it’s going to happen. People know it’s a big enough step, and we’ve got to get there.”

James Symons, Berkeley Lab’s Associate Director for Physical Sciences, said, “We look forward to building on this effort by furthering our R&D on superconducting undulator systems.

The Advanced Light Source, Advanced Photon Source, and Linac Coherent Light Source are DOE Office of Science User Facilities. The development of the superconducting undulator prototypes was supported by the DOE’s Office of Science.”

source: Lawrence Berkeley National Laboratory

About Mohammad Daeizadeh

  • تمامی فایل ها قبل از قرار گیری در سایت تست شده اند.لطفا در صورت بروز هرگونه مشکل از طریق نظرات مارا مطلع سازید.
  • پسورد تمامی فایل های موجود در سایت www.parsseh.com می باشد.(تمامی حروف را می بایست کوچک وارد کنید)
  • Password = www.parsseh.com

Leave a Reply

Your email address will not be published. Required fields are marked *